97 found, showing page 2 of 7
B & K 108-014 Heavy-Duty Sillcock Valve, 3/4 x 3/4 in Connection, FPT x Male Hose, 125 psi Pressure,
PRODUCT OVERVIEW
3/4 in threaded outlet. Lockshield prevents unwanted use of valve when handle is removed, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.
Product Details
Body Material:Brass
Connection Size:3/4 x 3/4 in
Connection Type:FPT x Male Hose
Pressure Rating:125 psi
Features
The valves are precisely engineered for outstanding service, long life and reliable performance
These valves offer easy operation and great flow
View Details
$18.99
B & K 108-003HC Sillcock Valve, 1/2 x 1/2 in Connection, FPT x Male Hose, 125 psi Pressure, Brass Bo
PRODUCT OVERVIEW
3/4 hose thread outlet. Six-point cast iron handle, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
Product Details
Body Material:Brass
Connection Size:1/2 in
Connection Type:FPT x Male Hose
Handle Material:Cast Iron
Length:4.25 in
Pressure Rating:125 psi
Features
The valves are precisely engineered for outstanding service, long life and reliable performance
These valves offer easy operation and great flow
View Details
$11.99
B & K 108-004HN Sillcock Valve, 3/4 x 3/4 in, FPT x Male Hose, Brass Body, 125 psi
PRODUCT OVERVIEW
3/4 hose thread outlet. Six-point cast iron handle, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
Product Details
Body Material:Brass
Connection Size:3/4 x 3/4 in
Connection Type:FPT x Male Hose
Handle Material:Cast Iron
Length:4.25 in
Pressure Rating:125 psi
Features
The valves are precisely engineered for outstanding service, long life and reliable performance
These valves offer easy operation and great flow
View Details
$11.99
BrassCraft PSSD-41 Gas Ball Valve, 1/2 in Connection, Flared x FIP, 5 psi Pressure, Brass Body
PRODUCT OVERVIEW
recommended for appliance connections. Corrosion-resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design certified and meets ANSI Z21-15.
Product Details
Body Material:Brass
Connection Size:1/2 in
Connection Type:Flare x FIP
Dimensions:6 in L x 5 in W x 1-1/4 in D
Media:LPG Air Mixtures
Pressure Rating:5 psi
Softgoods material:PTFE/Rubber
Temperature Rating:-40 to 125 deg F
Features
Heavy-duty forged brass body eliminates pinhole leaks commonly associated with cast products
Blowout-proof stem assembled from the in side with double O-ring to ensure safe, reliable performance
Specially designed PTFE seat rings assure longer life
Quarter-turn design for easy On/Off operation
Each valve is leak tested to help ensure reliability
Patented design handle integrates T and lever handles into one
View Details
$8.99
SharkBite UR22185 Ball Valve, 3/4 in Connection, Push-Fit, 250 psi Pressure, Brass Body
PRODUCT OVERVIEW
SharkBite(R) max ball valves innovative push-to-connect design makes for quick and easy installation when needing to install a new or replacement ball valve. Compatible with PEX, copper, CPVC and PE-RT pipe in any combination without a need for soldering, clamps, glue or unions. The valve can be installed where water shut-off is needed and rotated after install for easier installation in tight spaces.
Product Details
Body Material:Brass
Connection Size:3/4 in
Connection Type:Push-Fit
Dimensions:5.8 in L x 1.4 in W
Handle Material:Steel
Media:Water
Pressure Rating:250 psi
Softgoods material:EPDM/PTFE
Suitable for:Copper CPVC PE-RT PEX or HDPE SDR 9 Pipes
Temperature Rating:200 deg F
Features
Fastest way to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe
Half the insertion effort for smoother and faster connections, double the burst pressure
Can be installed on wet lines and is pressure testable immediately
Stainless steel retainer adds strength and durability
High-performance DZR lead-free brass body
No special tools, crimping, glue or soldering required
Can be rotated after installation
No tube liner required for PEX
Can be easily removed using a disconnect clip, disconnect tongs or pro disconnect tool
Stainless steel collar allows fittings to withstand 2X the burst pressure
View Details
$29.99
SharkBite Max UR22222A Push Ball Valve, 1/2 in Connection, Push to Connect, 250 psi Pressure, Brass
PRODUCT OVERVIEW
SharkBite Max ball valves' innovative push-to-connect design makes for quick and easy installation when needing to install a new or replacement ball valve. Compatible with PEX, copper, CPVC and PE-RT pipe in any combination without a need for soldering, clamps, glue or unions. The valve can be installed where water shut off is needed and rotated after install for easier installation in tight spaces.
Product Details
Body Material:Brass
Connection Size:1/2 in
Connection Type:Push to Connect
Dimensions:5.4 in L x 2.1 in H
Handle Material:Steel
Pressure Rating:250 psi
Temperature Rating:200 deg F
Features
Fastest way to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipes
Half the insertion effort, double the burst pressure
Can be installed on wet lines and pressure tested immediately
Stainless steel retainer adds strength and durability
High-performance DZR lead-free brass body
No special tools, crimping, soldering or glue required
Can be rotated after installation
No tube liner required for PEX
Can be easily removed using a disconnect clip, disconnect tongs or pro disconnect tool
View Details
$22.99
SharkBite Max UR23036 Ball Valve, 1/2 x 3/8 in Connection, Push-to-Connect x Compression, 125 psi Pr
PRODUCT OVERVIEW
SharkBite(R) max angle stops are used on stub-outs coming out of the wall and are used to control and shut off water flow to fixtures and appliances for maintenance and repair. Innovative design with a 1/2 in push-to-connect inlet makes for quick-installation and quarter-turn full port brass ball valves make for easy operation. Ideal for working in tight spaces. Faster install times and ease of use reduce installation errors.
Product Details
Body Material:DZR Brass
Connection Size:1/2 x 3/8 in
Connection Type:Push-To-Connect x Compression
Dimensions:2.6 x 1.7 x 1.1 in
Finish:Chrome-Plated
Media:Water
Port Type:Full Quarter-Turn
Pressure Rating:125 psi
Softgoods material:EPDM
Suitable for:Copper CPVC PE-RT PEX or HDPE SDR 9 Pipes
Temperature Rating:160 deg F
Trim Material:Stainless Steel
Features
Fastest way to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe
Can be installed on wet lines and is pressure testable immediately
Stainless steel retainer adds strength and durability
High-performance DZR lead-free brass body
No special tools, crimping, glue or soldering required
Can be rotated after installation
No tube liner required for PEX
Can be easily removed using a disconnect clip, disconnect tongs or pro disconnect tool
View Details
$12.99
SharkBite Max UR23336 Ball Valve, 1/2 x 1/4 in Connection, Push-to-Connect x Compression, 125 psi Pr
PRODUCT OVERVIEW
SharkBite(R) max angle stops are used on stub-outs coming out of the wall and are used to control and shut off water flow to fixtures and appliances for maintenance and repair. Innovative design with a 1/2 in push-to-connect inlet makes for quick-installation and quarter-turn full port brass ball valves make for easy operation. Ideal for working in tight spaces. Faster install times and ease of use reduce installation errors.
Product Details
Body Material:DZR Brass
Connection Size:1/2 x 1/4 in
Connection Type:Push-To-Connect x Compression
Dimensions:2.6 x 1.6 x 1.1 in
Finish:Chrome-Plated
Media:Water
Port Type:Full Quarter-Turn
Pressure Rating:125 psi
Softgoods material:EPDM
Suitable for:Copper CPVC PE-RT PEX or HDPE SDR 9 Pipes
Temperature Rating:160 deg F
Trim Material:Stainless Steel
Features
Fastest way to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe
Can be installed on wet lines and is pressure testable immediately
Stainless steel retainer adds strength and durability
High-performance DZR lead-free brass body
No special tools, crimping, glue or soldering required
Can be rotated after installation
No tube liner required for PEX
Can be easily removed using a disconnect clip, disconnect tongs or pro disconnect tool
View Details
$12.99
Danco 80416 Wheel Handle, For: Hose Bibb Faucets, Sillcocks, Metal
PRODUCT OVERVIEW
The Danco square broach valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday use.
Product Details
Finish:Metallic
Material:Metal
Suitable for:Hose Bibb Faucets Sillcocks Stopcocks and Valves
Features
Metal construction for added durability and stability
5/16 in square broach
Easy to install
View Details
$4.29
Watts 3552-0808/P-673 In-Line Valve, 1/2 x 3/8 in Connection, NPS x CTS, 250 psi Pressure, Thermopla
PRODUCT OVERVIEW
Sea Tech(R) 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech(R) 24 Series fittings. The Sea Tech(R) quick-connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech(R) fitting in place for a zero leak connection.
Product Details
Body Material:Thermoplastic
Color:Off-White
Connection Size:1/2 x 3/8 in
Connection Type:NPS x CTS
Media:Cold Water Hot
Number of Ports/ Ways:2
Pressure Rating:250 psi
Softgoods material:EPDM Rubber
Temperature Rating:75 deg F
Features
Incorporate stainless steel gripping teeth in the collets Corrosion-resistant teeth allow SeaTech connectors to interconnect with multiple materials without the need for special tools or tube inserts Exclusive O-ring guide insures zero leak connections
The direction of the tubing can be oriented by a simple twist, reducing the amount of tubing required to plumb a water system
View Details
$11.99
Arrowhead Brass 302LF Heavy-Duty Hose Bibb, 3/4 x 3/4 in Connection, MIP x Hose, 8 to 9 gpm, 125 psi
PRODUCT OVERVIEW
Arrowhead Brass Heavy-Duty Hose Bibb, 3/4 x 3/4 in Connection, MIP x Hose Connection, 8 to 9 gpm, 125 psi, Actuator Type: T-handle, Temperature Rating: 180 deg F, Body Material: Bronze, Green, Dimensions: 1-1/4 in W x 4 in D x 3-1/2 in H
Product Details
Actuator Type:T-handle
Body Material:Bronze
Color:Green
Connection Size:3/4 x 3/4 in
Connection Type:MIP x Hose
Dimensions:1-1/4 in W x 4 in D x 3-1/2 in H
Flow Rate:8 to 9 gpm
Pressure Rating:125 psi
Temperature Rating:180 deg F
Features
Made from heavy duty lead-free bronze alloy
View Details
$19.99
Southland 105-904NL Stop and Drain Valve, 3/4 in Connection, FPT x FPT, Brass Body
PRODUCT OVERVIEW
Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8 in square key. Threaded ends comply with ANSI B1.20.2.
Product Details
Body Material:Brass
Connection Size:3/4 in
Connection Type:FPT x FPT
Number of Ports/ Ways:2
Features
Can be operated with a square key
Drains non-pressure side of line automatically when closed
View Details
$42.99
Arrowhead Brass 456 Series 456-04LF Wall Hydrant, 1/2 in Inlet, MIP x Copper Sweat Inlet, 3/4 in Out
PRODUCT OVERVIEW
1/2 in MIP and 1/2 in sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, one-piece O-ring bonnet and rubber-coated oval handle.
Product Details
Flow Rate:13 gpm
Handle Material:Aluminum
Handle Type:Faucet Wheel
Includes:O-Ring Bonnet Stem
Inlet Connection Size:1/2 in
Inlet Connection Type:MIP x Copper Sweat
Outlet Connection Size:3/4 in
Outlet Connection Type:Male Hose Thread
Pressure Rating:125 psi
Rod Material:Brass
Features
Heavy-duty lead-free bronze construction
Protects faucet and pipes from freezing and damage by separating cold weather from water supply
Faucet should not be pressurized for more than 12 consecutive hours
Faucet must be installed at a downward angle to ensure drainage and prevent freezing
When using self-closing nozzle, always relieve pressure after shut-off
View Details
$34.99
B & K 102-453HN Hose Bibb, 1/2 x 1/2 in Connection, FPT x Male Hose, 125 psi Pressure, Brass Body, A
PRODUCT OVERVIEW
Easy quarter turn On/Off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats and rust-resistant handle. 125 psi max working pressure. 3/4 in hose thread outlet. IAPMO-ANSI/NSF 61-9 Approved. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging, each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.
Product Details
Body Material:Brass
Connection Size:1/2 x 1/2 in
Connection Type:FPT x Male Hose
Finish:Antique
Length:9.5 in
Media:Water
Pressure Rating:125 psi
Softgoods material:PTFE
Trim Material:Brass
Features
The valves are precisely engineered for outstanding service, long life and reliable performance
These valves offer easy operation and great flow
View Details
$11.99
B & K 102-403 Hose Bibb, 1/2 x 3/4 in Connection, FPT x Male Hose, 125 psi Pressure, Brass Body
PRODUCT OVERVIEW
for use with water or oil, multi-turn operation, 3/4 in hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.
Product Details
Body Material:Brass
Connection Size:1/2 x 3/4 in
Connection Type:FPT x Male Hose
Media:Oil Water
Pressure Rating:125 psi
Trim Material:Brass
Features
The valves are precisely engineered for outstanding service, long life and reliable performance
These valves offer easy operation and great flow
View Details
$10.99
